T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-409001.png)
Piston: Service and Repair
Disassembly
1. Using a small screwdriver, pry out the 2 snap rings.
2. Gradually heat the piston to about 60° C (140° F).
3. Using a plastic-faced hammer and brass bar, lightly tap out the piston pin and remove the connecting rod.
NOTE:
^
The piston and pin are a matched set.
^
Arrange the pistons, pins, rings, connecting rods and bearings in the correct order.
