T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-441001.png)
Drive Belt: Service and Repair
DRIVE BELT REMOVAL
1. REMOVE ENGINE UNDER COVER
2. LOOSEN IDLE PULLEY LOCK NUT
Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)
3. REMOVE DRIVE BELT
Loosen the adjusting bolt and remove the drive belt.
DRIVE BELT INSTALLATION
Installation is in the reverse order of removal.
