T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-747001.png)
Camshaft Position Sensor: Service and Repair
COMPONENTS FOR REMOVAL AND INSTALLATION
CAMSHAFT POSITION SENSOR REMOVAL
1. REMOVE No.2 TIMING BELT COVER
2. REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the camshaft position sensor connector.
(b) Remove the bolts and camshaft position sensor.
Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf)
CAMSHAFT POSITION SENSOR INSTALLATION
INSTALLATION HINT: Installation is in the reverse order of removal.
