T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-964004.png)
(i) Position the injector connector outward.
2. CONNECT INJECTOR CONNECTORS
3. INSTALL FUEL PIPE AND TIGHTENING DELIVERY PIPE HOLDING BOLTS
(a) Install the fuel pipe with 4 new gaskets and the 2a union bolts.
Torque: 34.3 N.m (350 kgf.cm. 25 ft.lbf)
(b) Tighten the 4 bolts holding the delivery pipes to the intake manifold.
Torque: 13 N.m (130 kgf.cm, 10 ft.lbf)
4. CONNECT FUEL INLET PIPE
(a) Temporarily install the union and 2 new gaskets. and connect the fuel pipe.
(b) Install the clamp bolt.
Torque: 8 N.m (80 kgf.cm, 71 in.lbf)
(c) Tighten the union bolt.
Torque: 34.3 N.m (350 kgf.cm, 25 ft.lbf)
