T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
(d) Please refer to the TOYOTA hand - held tester operator's manual for further details.
(e) If you have no TOYOTA hand-held tester, connect the positive (+) and negative (-) leads from the battery to the fuel pump connector.
(f) Pinch the fuel return hose.
The pressure in the high pressure line will rise to approx. 400 kPa (4 kgf/sq.cm, 57 psi). In this state, check to see that there are no leaks from
any part of the fuel system.
NOTICE: Always pinch the hose. Avoid bending as it may cause the hose to crack.
(g) Turn the ignition switch to LOCK.
(h) Disconnect the TOYOTA hand-held tester from the DLC3.