T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-596001.png)
Camshaft Position Sensor: Component Tests and General Diagnostics
CAMSHAFT POSITION SENSOR INSPECTION
NOTICE: "Cold" and "Hot" in the following sentences ax- press the temperature of the sensor itself. "Cold" is from -10°C (14°F) to 50°C (122
°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).
1. DISCONNECT CAMSHAFT POSITION SENSOR CONNECTOR
2. INSPECT CAMSHAFT POSITION SENSOR RESISTANCE
Using an ohmmeter, measure the resistance between terminals.
Resistance:
Cold: 835 - 1,400 ohms
Hot: 1.060 - 1,645 ohm
If the resistance is not as specified, replace the camshaft position sensor.
3. RECONNECT CAMSHAFT POSITION SENSOR CONNECTOR
