T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
Starter Relay: Testing and Inspection
STARTER RELAY (Marking: "ST") INSPECTION
1. REMOVE STARTER RELAY
Relay & Junction Block # 1
LOCATION: The relay is located in the No.1 junction block on the driver's side.
2. INSPECT STARTER RELAY
A. Inspect relay continuity
a. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
b. Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.