T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
Neutral Safety Switch: Service and Repair
REPLACEMENT
1. Disconnect oil cooler pipes.
2. Remove park/neutral position switch, as follows:
a. Disconnect the connector.
b. Pry off the lock washer and remove the nut.
c. Remove the bolt and park/neutral position switch.
3. Install park/neutral position switch, as follows:
a. Install the park/neutral position switch and bolt.
Torque: 13 N.m (108 inch lbs.).
b. Install a new lock plate and the nut.
Torque: 3.9 N.m (35 inch lbs.).
c. Stake the nut with the lock plate.
d. Adjust the park/neutral position switch.
e. Connect the connector.
4. Connect oil cooler pipes.