T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-270001.png)
Transmission Temperature Sensor/Switch: Service and Repair
REPLACEMENT
1. Disconnect Automatic Transmission Fluid (ATF) Temperature sensor connector.
2. Remove ATF temperature sensor, as follows:
a. Remove the ATF temperature sensor.
b. Remove the O-ring from the ATF temperature sensor.
3. Install ATF temperature sensor, as follows:
a. Coat a new O-ring with ATF and install it to the ATF temperature sensor.
b. Install the ATF temperature sensor.
Torque: 15 N.m (11 ft. lbs.).
4. Connect ATF temperature sensor connector.
INSTALLATION NOTICE: Be careful not to twist the wire harness.
