toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Starter Bearing > < Neutral Safety Switch|Specifications|Page 5282
Page 1
background image

Starter Armature: Testing and Inspection

Armature Coil

1. INSPECT COMMUTATOR FOR OPEN CIRCUIT

Using an ohmmeter, check that there is continuity between the segments of the commutator.

If there is no continuity between any segment, replace the armature.

2. INSPECT COMMUTATOR FOR GROUNDED

Using an ohmmeter, check that there is no continuity between the commutator and armature coil core. If there is continuity, replace the armature.

Starter Bearing > < Neutral Safety Switch|Specifications|Page 5282