T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
Front Steering Knuckle: Service and Repair
Removal and Installation
Front Axle - 2 WD
REMOVAL
1. Remove the front wheel.
2. With Anti-Lock Brake System (ABS), disconnect the ABS speed sensor from the steering knuckle.
3. Remove the brake caliper, as follows:
a. Remove the two brake caliper set bolts.
b. Support the brake caliper securely.
4. Check the axle hub bearing backlash, as follows:
a. Remove the cap, cotter pin and lock cap.