T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-1679002.png)
a. Remove the two bolts and disconnect the shock absorber lower side from the lower suspension arm.
Torque: 19 Nm (13 ft. lbs.).
b. Hold the shock absorber and remove the set nut, two retainers, cushion and shock absorber.
Torque: 25 Nm (18 ft. lbs.).
c. Remove the two retainers and cushion from the shock absorber.
INSTALLATION
Installation is in the reverse order of removal.
Inspection
INSPECTION
Inspect the shock absorber by compressing and extending the shock absorber piston rod and check that there is no abnormal resistance or unusual
operation sounds. If there is any abnormality, replace the shock absorber with a new one.
