T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
3. Check piston stroke of direct clutch.
a. Place the direct clutch assembly onto the O/D support assembly.
b. Using SST 09350 - 30020 (09350 - 06120) and a dial indicator, measure the direct clutch piston stroke while applying and releasing
compressed air (392 - 785 kPa, 57 - 114 psi).
Piston stroke: 1.37 - 1.60 mm (0.0359 - 0.0630 in.)
If the values are non-standard, inspect the discs.
4. Remove flange, plates and discs.
a. Using a screwdriver, remove the snap ring from the direct clutch drum.
b. Remove the flange, plates and discs.
5. Remove piston return spring.
a. Place SST 09350 - 30020 (09350 - 07040) on the spring retainer and compress the return spring with a shop press.
b. Using snap ring pliers, remove the snap ring.
c. Remove the piston return spring.