T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
a. Install the piston return spring.
b. Place SST 09350 - 30020 (09350 - 07040) on the spring retainer, and compress the return spring with a shop press.
c. Install the snap ring with snap ring pliers. Be sure the end gap of the snap ring is not aligned with the spring retainer claw.
5. Install cushion plate rounded end down
6. Install plates, discs and flange.
a. Install in order: P = Plate D = Disc
-
P-D-P-D-P-D-P-D-P-D
b. And then install the flange, the rounded edge facing downward.
HINT: There are 8 different thicknesses for the flange.
c. Install the snap ring with a screwdriver. Be sure the end gap of the snap ring is not aligned with the cutout portion of the forward clutch drum.