T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-1185030.png)
3. Check overdrive direct clutch drum bushings.
Using a dial indicator, measure the inside diameter of the clutch drum bushings.
Maximum inside diameter: 27.11 mm (1.0673 in.)
If the inside diameter is greater than the maximum, replace. the clutch drum.
4. Check overdrive planetary gear bushing.
Using a dial indicator, measure the inside diameter of the planetary gear bushing.
Maximum inside diameter: 11.27 mm (0.4437 in.)
If the inside diameter is greater than the maximum replace the planetary gear.
5. Measure planetary pinion gear thrust clearance.
Using a feeler gauge, measure the planetary pinion gear thrust clearance.
Standard clearance: 0.20 - 0.60 mm (0.0079 - 0.0236 in.)
Maximum clearance: 1.00 mm (0.0394 in.)
If the clearance is greater than the maximum, replace the planetary gear assembly.
OVERDRIVE PLANETARY GEAR, OVERDRIVE DIRECT CLUTCH AND OVERDRIVE ONE-WAY CLUTCH ASSEMBLY
1. Install thrust washer to overdrive planetary gear.
Install the thrust washer to the overdrive planetary gear, the groove side facing upward.
