T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
b. Install the flange, the flat end facing downward.
c. Using a screwdriver, install the snap ring.
8. Check piston stroke of overdrive direct clutch.
a. Place the oil pump onto the torque converter clutch, and then place the O/D direct clutch assembly onto the oil pump.
b. Using SST 09350 - 30020 (09350 - 06120) and a dial indicator, measure the overdrive direct clutch piston stroke while applying and releasing
compressed air (392 - 785 kPa, 57 -114 psi).
Piston stroke: 1.85 - 2.15 mm (0.0728 - 0.0846 in.)
If the piston stroke is less than the limit, parts may have been assembled incorrectly, check and reassemble again.
If the piston stroke is non-standard, select another flange.
HINT: There are 6 different thicknesses for the flange.