T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
Planetary Gears: Service and Repair
Front Planetary Gear
NOTE: For removal and installation procedures refer to "Automatic Transmission/Transaxle, Service and Repair."
FRONT PLANETARY GEAR INSPECTION
1. Check front planetary ring gear bushing.
Using a dial indicator, measure the inside diameter of the planetary ring gear bushing.
Maximum inside diameter: 24.08 mm (0.9480 in.)
If the inside diameter is greater than the maximum, replace the planetary ring gear.
2. Measure planetary pinion gear thrust clearance.
Using a feeler gauge, measure the planetary pinion gear thrust clearance.
Standard clearance: 0.20 - 0.60 mm (0.0079 - 0.0236 in.)
Maximum clearance: 1.00 mm (0.0394 in.)
If the clearance is greater than the maximum, replace the planetary gear assembly.