T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-1364002.png)
4. Select spider bearing. Select the bearing according to whether or not there is a drill mark on yoke section.
5. Install spider bearing, as follows:
a. Apply Multi-Purpose (MP) grease to the spider and bearings.
NOTE: Be careful not to apply too much grease.
b. Align the matchmarks on the yoke and shaft.
c. Fit a new spider into the yoke.
d. Using SST 09332-25010 or equivalent, install a new bearing on the spider.
e. Using SST, adjust both bearings so that the snap ring grooves are at maximum and equal widths.
