T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-1367001.png)
Flex Plate: Testing and Inspection
DRIVE PLATE INSPECTION
1. Measure drive plate runout and inspect ring gear. Set up a dial indicator, measure the drive plate runout.
Maximum runout: 0.20 mm (0.0079 inch).
If runout is not within the specification or if the ring gear is damaged, replace the drive plate. If installing a new drive plate, note the orientation of
spacers and tighten the bolts.
Torque: 83 N.m (61 ft. lbs.).
