T100 SR5 Extra Cab Pickup 2WD V6-3.4L (5VZ-FE) (1997)
/Page-2070001.png)
Washer Fluid Level Indicator: Testing and Inspection
Washer Level Warning Light
INSPECT WASHER LEVEL WARNING LIGHT
1. Disconnect the connectors from the level warning switch and parking brake switch.
2. Connect terminals on the wire harness side connector of the level warning switch connector.
3. Remove the CHARGE fuse and turn the ignition switch ON, check that the warning light come ON. If the warning light does not light up, test the
bulb.
