toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brake Caliper|Removal and Installation|Page 4996 > < Brake Caliper|Removal and Installation
Page 2
background image

Remove the 2 mounting bolts and remove the caliper.
Torque: 123 Nm (90 ft. lbs.) 

4. Remove these parts:

-

Clip

-

2 pins

-

Anti-rattle spring

-

2 pads

-

4 anti-squeal shims

INSTALLATION 

Installation is in the reverse order of removal.
1. After installation, fill brake reservoir brake fluid and bleed brake system.
2. Check for leaks.

Brake Caliper|Removal and Installation|Page 4996 > < Brake Caliper|Removal and Installation