Tacoma 2WD L4-2.4L (2RZ-FE) (1996)
/Page-1085002.png)
DISASSEMBLY
1. Pull out boot with push rod.
2. Remove piston.
Using compressed air, remove the piston with the spring from the cylinder.
REASSEMBLY
1. Coat piston with lithium soap base glycol grease, as shown.
2. Install piston with spring into cylinder.
3. Install boot with push rod to cylinder.
INSTALLATION
Installation is in the reverse order of removal.
HINT: After installation, bleed clutch system.
