Tacoma 2WD L4-2.7L (2TR-FE) (2005)
/Page-299001.png)
Camshaft Bearing: Specifications
Provisionally install the camshaft bearing cap No.1.
Check the proper location of each camshaft bearing cap No.2 and install each one.
Tighten the bolts in the order shown in the illustration.
Torque .............................................................................................................................................................. 12 Nm (122 kgf-cm, 9 ft. lbs.) for bolt A
Torque ........................................................................................................................................ 16 Nm (158 kgf-cm, 11 ft. lbs.) for bolts except bolt A
