Tacoma 2WD L4-2.7L (2TR-FE) (2005)
/Page-993004.png)
b. Remove the spring seat and 2 U-bolts.
7. REMOVE REAR SPRING U BOLT (4WD AND PRE RUNNER DRIVE TYPE)
a. Remove the 4 nuts and 4 washers.
b. Remove the spring seat and 2 U-bolts.
c. Remove the spring bumper.
8. REMOVE REAR LH SPRING ASSY
a. Remove the nut, washer and through bolt.
b. Remove the nut, washer and through bolt.
NOTICE: Be careful not to drop the spring when removing the through bolt.
c. Remove the spring.
9. REMOVE REAR SPRING SHACKLE SUB-ASSY NO.2
a. Remove the nut, washer, through bolt and shackle.