Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
Fuel Pump Relay: Testing and Inspection
1. REMOVE CIRCUIT OPENING RELAY.
2. INSPECT CIRCUIT OPENING RELAY.
-
Inspect relay continuity.
-
Using an ohmmeter, check that there is continuity between terminals ST and E1.
-
Check that there is continuity between terminals +B and FC.
-
Check that there is no continuity between terminals +B and FP.
-
If continuity is not as specified, replace the relay.
-
Inspect relay operation.
-
Apply battery positive voltage across terminals ST and E1.
-
Using an ohmmeter, check that there is continuity between terminals +B and FP.
-
If operation is not as specified, replace the relay.
3. REINSTALL CIRCUIT OPENING RELAY.