Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
Camshaft Position Sensor: Testing and Inspection
NOTICE: "Cold" and "Hot" in the following specification expresses the temperature of the sensor itself. "Cold" is from - 10°C (14°F) to 50°C
(122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).
1. DISCONNECT CAMSHAFT POSITION SENSOR CONNECTOR.
2. INSPECT CAMSHAFT POSITION SENSOR RESISTANCE.
-
Using an ohmmeter, measure the resistance between terminals.
-
Resistance:
Cold: 835 - 1,400 Ohms
Hot: 1,060 - 1,645 Ohms
If the resistance is not as specified, replace the camshaft position sensor.
3. RECONNECT CAMSHAFT POSITION SENSOR CONNECTOR.