Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
Oxygen Sensor: Testing and Inspection
INSPECT HEATER RESISTANCE OF HEATED OXYGEN SENSORS.
(Bank 1, Sensor 1, Bank 1 Sensor 2)
-
Disconnect the oxygen sensor connector.
-
Using an ohmmeter, measure the resistance between the terminals +B and HT.
Resistance: At 20°C (68°F): 11 - 16 Ohms
-
If the resistance is not as specified, replace the sensor.
Torque: 20 Nm (14 ft lb)
-
Reconnect the oxygen sensor connector.