Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
Maximum vertical runout: 0.09 mm (0.0035 inch)
Maximum lateral runout: 0.09 mm (0.0035 inch) If the runout is not within the specification, replace the companion flange.
2. Check ring gear runout. Using a dial indicator, measure the ring gear runout.
Maximum runout: 0.05 mm (0.0020 inch) If the runout is not within the specification, replace the ring gear.
3. Check ring gear backlash. Using a dial indicator, measure the ring gear backlash.
Backlash: 0.13 - 0.18 mm (0.0051 - 0.0071 inch)
If the backlash is not within the specification, adjust the side bearing preload or repair as necessary.
4. Check tooth contact between ring gear and drive pinion.