Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
/Page-1102001.png)
Axle Shaft: Service and Repair
Hub Bolt Removal and Installation
HUB BOLT REPLACEMENT
1. Remove wheel and brake drum.
2. Remove hub bolt.
Using SST, 09650-17011
3. Install hub bolt.
Install a washer and nut to a new hub bolt as shown and install the hub bolt with torquing the nut.
4. Install brake drum and wheel.
Torque to 110 Nm (83 ft. lbs.)
