Tacoma 2WD V6-4.0L (1GR-FE) (2006)
/Page-1438006.png)
b. Engage the 2 claws and install the hood lock control lever sub-assembly.
3. INSTALL HOOD LOCK CONTROL CABLE PROTECTOR SUB-ASSEMBLY
a. Install the hood lock control cable protector subassembly with the 2 nuts.
Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)
4. INSTALL WASHER NOZZLE SUB-ASSEMBLY
a. Connect the washer hose.
b. Engage the 2 claws and install the washer nozzle sub-assembly.
5. INSTALL HOOD SUPPORT
a. Engage the 2 claws and install the hood stay holder.
