Tacoma 2WD V6-4.0L (1GR-FE) (2006)
Tailgate Cover: Service and Repair
TAILGATE PROTECTOR
REMOVAL
1. REMOVE TAILGATE PROTECTOR
a. Using "Torx" socket wrench T30, remove the 7 screws.
b. Apply protective tape to the outer circumference of the tailgate protector.
c. Using a moulding remover, disengage the 10 claws and remove the tailgate protector.
INSTALLATION
1. INSTALL TAILGATE PROTECTOR
a. Engage the 10 claws and install the tailgate protector.