Tacoma 2WD V6-4.0L (1GR-FE) (2006)
1. INSTALL RADIATOR TANK UPPER
a. Install the new radiator tank.
b. Tap the core plate with a soft-faced hammer until there is no gap between the core plate and radiator tank.
2. INSTALL RADIATOR TANK LOWER
HINT: Perform the same procedures as for the radiator tank upper.
3. ASSEMBLE SST
SST 09230-01010 (09231-01010, 09231-01020)
a. Install the punch assembly into the overhaul handle by inserting it into the hole in part A as shown in the illustration.
b. While gripping the handle, adjust the stopper bolt so that dimension B is as shown in the illustration.
Dimension B: 8.4 mm (0.331 inch)