Tacoma 2WD V6-4.0L (1GR-FE) (2006)
81. INSTALL HEATER WATER INLET HOSE (for 1GR-FE)
a. Install the heater water inlet hose onto the heater unit.
NOTE: Make sure that the hose clip and mark are at the correct angle when installing.
82. INSTALL AIR CONDITIONING TUBE ASSEMBLY
a. Apply compressor oil to 2 new O-rings and install them onto the hose.
Compressor oil: RL-897 or equivalent
b. Install the air conditioner tube and piping clamp.
HINT: Check that the claw of the piping clamp is correctly fitted.
c. Install the bracket with the bolt and 2 clamps.