Tacoma 2WD V6-4.0L (1GR-FE) (2006)
g. It is extremely dangerous to perform any work on a vehicle raised on a jack alone, even for work that can be finished quickly. Rigid racks must
be used to support the vehicle.
4. NOTICE FOR USING SWING ARM TYPE LIFT
a. Follow safety procedures outlined in its instruction manual.
b. Use a swing arm equipped with a rubber attachment.
c. Set in the vehicle so as to make its center of gravity as close as possible to the center of the lift. (L becomes short.)
d. Place the vehicle horizontally by adjusting the height of the cradle, and match the groove of the cradle and the safety stand support location
accurately.
e. Be sure to lock the swing arms before lifting and during work (if equipped with arm locks).