Tacoma 2WD V6-4.0L (1GR-FE) (2006)
6. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY
a. Install the brake caliper with the 2 bolts.
Torque: 108 Nm (1,101 kgf-cm, 80 ft. lbs.)
b. Install a new gasket and flexible hose with the union bolt.
Torque: 30 Nm (306 kgf-cm, 22 ft. lbs.)
HINT: Install the flexible hose lock securely into the lock hole in the disc brake cylinder.
7. INSTALL FRONT FLEXIBLE HOSE
a. Install the front flexible hose with the bolt.
Torque: 32 Nm (326 kgf-cm, 24 ft. lbs.)
8. INSTALL FRONT SPEED SENSOR
a. Install the speed sensor front with the bolt.
Torque: 8.3 Nm (85 kgf-cm, 73 inch lbs.)
NOTICE: Make sure that the sensor tip is clean.
9. INSTALL SKID CONTROL SENSOR WIRE
a. Install the skid control sensor wire with the 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
b. Connect the speed sensor connector.
10. INSTALL FRONT WHEEL