Tacoma 2WD V6-4.0L (1GR-FE) (2006)
e. Disconnect the 2 VSV connectors.
f.
Disconnect the throttle motor connector.
g. Remove the 3 wire harness clamps and hose clamp.
h. Remove the 3 upper bolts which are used to secure the 2 surge tank stays and throttle body bracket.
i.
Using an 8 mm socket hexagon wrench, remove the 4 bolts.
j.
Remove the 2 nuts, then remove the intake air surge tank and gasket.
7. DISCONNECT NO.1 FUEL PIPE SUB-ASSEMBLY
a. Remove the fuel pipe clamp.