Tacoma 2WD V6-4.0L (1GR-FE) (2006)
c) Using a dry cloth, wipe off any dust or dirt from the existing Tire and Loading Information Label.
d) Turn the Tire and Loading Information Label over to the front side.
e) Affix the new label over the existing label, as shown in the illustration.
NOTE:
^ The new Tire and Loading Information Label includes only the updated seating capacity information, the remaining portions of the label are clear.
^ When installing the new label, make sure to line it up with the existing one.
f) Peel off the top section of the backing sheet from the label in the direction shown in the illustration, and affix the label while smoothing out any air
bubbles.