Tacoma 2WD V6-4.0L (1GR-FE) (2006)
Fog/Driving Lamp Switch: Testing and Inspection
FRONT FOG LIGHT SWITCH
INSPECTION
1. INSPECT FRONT FOG LIGHT SWITCH
a. Check the resistance.
1. Measure the resistance using an ohmmeter, and check the results in accordance with the value(s) in the table.
If the result is not as specified, replace the front fog light switch assembly.
b. Check the illumination operation.
1. Connect the battery positive (+) lead to terminal 1 and the battery negative (- ) lead to terminal 2, then check that the illumination comes
on.
Standard: Illumination comes on.
If the illumination does not come on, replace the bulb.