Tacoma 2WD V6-4.0L (1GR-FE) (2006)
Headlamp Dimmer Switch: Testing and Inspection
HEADLIGHT DIMMER SWITCH
INSPECTION
1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY
a. Check the resistance of the light control switch.
1. Measure the resistance using an ohmmeter, and check the results in accordance with the value(s) shown in the table.
If the result is not as specified, replace the headlight dimmer switch assembly.
b. Check the resistance of the headlight dimmer switch.
1. Measure the resistance using an ohmmeter, and check the results in accordance with the value(s) shown in the table.
If the result is not as specified, replace the headlight dimmer switch assembly.
c. Check the resistance of the turn signal switch.
1. Measure the resistance using an ohmmeter, and check the results in accordance with the value(s) shown in the table.
If the result is not as specified, replace the headlight dimmer switch assembly.