Tacoma 2WD V6-4.0L (1GR-FE) (2006)
Seat Position Sensor: Service and Repair
Seat Position Sensor (For Bench Seat Type)
Seat Position Sensor (for Bench Seat Type)
SEAT POSITION SENSOR (for Bench Seat Type)
REMOVAL
NOTE:
-
If the wiring connector for the SRS is disconnected with the ignition switch in the ON position, DTCs will be recorded.
-
Never use SRS parts from another vehicle. When replacing the parts, replace them with new ones.
-
Never reuse a seat position sensor if an airbag has previously deployed in a collision.