Tacoma 2WD V6-4.0L (1GR-FE) (2006)
a. Attach the brushes and terminals to the rectifier end frame of the regulator generator with brush.
b. Install the regulator generator with brush with the 3 screws.
HINT: Install the screw B into the position shown in the illustration.
Torque:
2.5 N.m (25 kgf.cm, 22 in.lbf) for screw A
1.2 N.m (12 kgf.cm, 11 in.lbf) for screw B
6. INSTALL REAR GENERATOR END COVER
a. Install the generator rear end cover with the 2 nuts and screw.
Torque:
19 N.m (194 kgf.cm, 14 ft.lbf) for nut A
12 N.m (122 kgf.cm, 9 ft.lbf) for nut B
2.8 N.m (29 kgf.cm, 25 in.lbf) for screw