Tacoma 2WD V6-4.0L (1GR-FE) (2006)
Alignment: Service and Repair
NOTICE: For Zero Point Calibration information, please refer to: TSB T-SB-0020-8 (3/25/08).
FRONT WHEEL ALIGNMENT (2WD)
ADJUSTMENT
1. INSPECT TIRE
2. MEASURE VEHICLE HEIGHT
Vehicle height
Measuring points:
A: Ground clearance of front wheel center
B: Ground clearance of adjustment cam bolt center (front side)
C: Ground clearance of rear wheel center
D: Ground clearance of rear leaf spring front side bush center
NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
Bounce the vehicle up and down at the corners to stabilize the suspension before inspecting the vehicle height.
3. INSPECT TOE-IN
Toe-in