Tacoma 2WD V6-4.0L (1GR-FE) (2006)
2. INSTALL PULLEY SHAFT SUB-ASSEMBLY
a. Coat the bushing inner surface of the vane pump housing front with power steering fluid.
b. Gradually insert the vane pump shaft.
NOTICE: Do not damage the vane pump housing oil seal lip in the vane pump housing front.
3. INSTALL VANE PUMP SIDE PLATE FRONT
a. Coat a new O-ring with power steering fluid and install it onto the vane pump housing front.
b. Coat a new O-ring with power steering fluid and install it onto the side plate.
c. Align the dent of the side plate with that of the vane pump housing front and install the side plate.
NOTICE: Make sure that the side plate is installed facing the correct direction.