Tacoma 2WD V6-4.0L (1GR-FE) (2006)
3. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE
a. Using SST, disconnect the flexible hose tube.
SST 09023-00101
4. REMOVE FRONT DOOR SCUFF PLATE LH
5. REMOVE COWL SIDE TRIM BOARD LH
6. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
7. SEPARATE DRIVER SIDE JUNCTION BLOCK
8. REMOVE CLUTCH PEDAL WITH CLUTCH MASTER CYLINDER
a. Disconnect the clutch start switch connector.
b. Remove the 2 nuts and bolt, then remove the clutch pedal with clutch master cylinder.
9. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
a. Disconnect the clutch reservoir tube.
b. Using SST, disconnect the 2 way tube from the clutch master cylinder.
SST 09023-00101
c. Remove the nut and clutch start switch from the clutch pedal support.