Tacoma 2WD V6-4.0L (1GR-FE) (2006)
d. Remove the 2 bolts, then remove the clutch master cylinder.
INSTALLATION
1. INSTALL CLUTCH MASTER CYLINDER ASSEMBLY
a. Install the clutch master cylinder with the 2 bolts.
Torque: 16 Nm (158 kgf-cm, 11 ft. lbs.)
b. Install the clutch start switch with the nut.
Torque: 16 Nm (160 kgf-cm, 12 ft. lbs.)
c. Using SST, connect the clutch master cylinder to 2 way tube.
SST 09023-00101
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
d. Connect the clutch reservoir tube.
2. INSTALL CLUTCH PEDAL WITH CLUTCH MASTER CYLINDER
a. Install the clutch pedal with clutch master cylinder onto the vehicle with the 2 nuts and bolt.
Torque:
14 Nm (145 kgf-cm, 10 ft. lbs.) for nut