Tacoma 2WD V6-4.0L (1GR-FE) (2006)
11.
Install the clutch pedal bushes.
A.
Apply MP grease to the 2 NEW bushes.
B.
Install the 2 bushes onto the clutch pedal.
12.
Install the clutch pedal pad.
13.
Install the clutch pedal spring holder.
A.
Apply MP grease to the contact surface of the clutch pedal spring holder.
B.
Install the clutch pedal spring holder.
14.
Install the NEW clutch pedal sub-assembly.
A.
Install the clutch pedal onto the clutch support with the bolt and nut.
Torque: 34 N.m (347 kgf.cm, 25 ft.lbf)
HINT: