Tacoma 2WD V6-4.0L (1GR-FE) (2006)
/Page-867004.png)
7. REMOVE CLUTCH PEDAL SHAFT COLLAR
a. Remove the clutch pedal shaft collar.
8. REMOVE CLUTCH PEDAL NO.1 CUSHION
a. Using needle-nose pliers, remove the No. 1 cushion from the clutch pedal.
INSTALLATION
1. INSTALL CLUTCH PEDAL NO.1 CUSHION
a. Install the No. 1 cushion onto the clutch pedal.
2. INSTALL CLUTCH PEDAL SHAFT COLLAR
a. Apply MP grease to the clutch pedal shaft collar.
b. Install the clutch pedal shaft collar onto the clutch pedal.
3. INSTALL CLUTCH PEDAL BUSH
a. Apply MP grease to 2 new bushes.
b. Install the 2 bushes onto the clutch pedal.
4. INSTALL CLUTCH PEDAL PAD
