Tacoma 2WD V6-4.0L (1GR-FE) (2006)
/Page-1746002.png)
7. REMOVE COWL TOP VENTILATOR LOUVER SUBASSEMBLY
a. Disengage the 2 clips.
b. Disengage the 15 claws, then remove the cowl top ventilator louver sub-assembly.
8. REMOVE WINDSHIELD WIPER MOTOR AND LINK
a. Disconnect the connector, then remove the 2 bolts.
b. Slide the wiper link assembly to the passenger side seat side. Disengage the meshing of the rubber pin, then remove the windshield wiper
motor & link assembly.
9. REMOVE FRONT WIPER MOTOR
a. Using a screwdriver wrapped with protective tape, disengage the meshing of the 2 rods at the crank arm pivot of the windshield wiper motor
assembly.
