Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
/Page-333001.png)
Crankshaft: Specifications
DIMENSIONS
Thrust Clearance
STD ............................................................................................................................................................. 0.020 - 0.220 mm (0.0008 - 0.0087 inch)
Maximum ............................................................................................................................................................................... 0.300 mm (0.0118 inch)
Thrust Washer Thickness
STD ............................................................................................................................................................. 2.440 - 2.490 mm (0.0961 - 0.0980 inch)
Main Journal Oil Clearance
STD
No. 3 ...................................................................................................................................................... 0.030 - 0.055 mm (0.0012 - 0.0022 inch)
Others .................................................................................................................................................... 0.024 - 0.049 mm (0.0009 - 0.0019 inch)
U/S 0.25
No. 3....................................................................................................................................................... 0.030 - 0.070 mm (0.0012 - 0.0028 inch)
Others .................................................................................................................................................... 0.025 - 0.065 mm (0.0010 - 0.0026 inch)
Maximum ................................................................................................................................................................................. 0.10 mm (0.0039 inch)
Main Journal Diameter
STD
No. 3 .................................................................................................................................................. 59.981 - 59.994 mm (2.2615 - 2.3620 inch)
Others ................................................................................................................................................ 59.987 - 60.000 mm (2.3617 - 2.3622 inch)
U/S 0.25
No. 3 .................................................................................................................................................. 59.740 - 59.750 mm (2.3520 - 2.3524 inch)
Others ................................................................................................................................................ 59.745 - 59.755 mm (2.3522 - 2.3526 inch)
Main Bearing Center Wall Thickness
STD
Mark 1 ................................................................................................................................................... 1.987 - 1.990 mm (0.0782 - 0.0783 inch)
Mark 2 ................................................................................................................................................... 1.991 - 1.993 mm (0.0784 - 0.0785 inch)
Mark 3 ................................................................................................................................................... 1.994 - 1.996 mm (0.0785 - 0.0786 inch)
U/S 0.25 ...................................................................................................................................................... 2.106 - 2.112 mm (0.0829 - 0.0831 inch)
Crank Pin Diameter
STD ......................................................................................................................................................... 52.987 - 53.000 mm (2.0861 - 2.0866 inch)
U/S 0.25 .................................................................................................................................................. 52.745 - 52.755 mm (2.0766 - 2.0770 inch)
Circle Runout
Maximum ................................................................................................................................................................................. 0.03 mm (0.0012 inch)
Main Journal Taper And Out-Of-Round
Maximum ............................................................................................................................................................................... 0.005 mm (0.0002 inch)
Crank Pin Taper And Out-of-round
Maximum ............................................................................................................................................................................... 0.005 mm (0.0002 inch)