Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
Oxygen Sensor: Testing and Inspection
INSPECT HEATER RESISTANCE OF HEATED OXYGEN SENSORS
-
Disconnect the heated oxygen sensor connector.
-
Using an ohmmeter, measure the resistance between terminals +B and HT.
Resistance: At 20°C (68°F):
Bank 1 Sensor 1: 5 - 7 ohms
Bank 1 Sensor 2:11 - 16 ohms
-
If resistance is not as specified, replace the heated oxygen sensor.
-
Reconnect the heated oxygen sensor connector.